Spiolto Respimat

Spiolto Respimat Caution For Usage

Manufacturer:

Boehringer Ingelheim
The information highlighted (if any) are the most recent updates for this brand.
Full Prescribing Info
Caution For Usage
Instructions for Use: The patient will need to use this inhaler only ONCE A DAY. The patient should take TWO PUFFS each use.
If SPIOLTO RESPIMAT has not been used for more than 7 days release one puff towards the ground.
If SPIOLTO RESPIMAT has not been used for more than 21 days repeat steps 4 to 6 under 'Prepare for first use' until a cloud is visible. Then repeat steps 4 to 6 three more times.
How to care for the SPIOLTO RESPIMAT: Clean the mouthpiece including the metal part inside the mouthpiece with a damp cloth or tissue only, at least once a week.
Any minor discoloration in the mouthpiece does not affect the SPIOLTO RESPIMAT inhaler performance.
When to get a new SPIOLTO RESPIMAT: The SPIOLTO RESPIMAT inhaler contains 60 puffs (30 doses) if used as indicated (two puffs/Once daily).
The dose indicator shows approximately how much medication is left.
When the dose indicator enters the red area of the scale the patient needs to get a new prescription; there is approximately medication for 7 days left (14 puffs).
Once the dose indicator reaches the end of the red scale, the SPIOLTO RESPIMAT locks automatically - no more doses can be released. At this point, the clear base cannot be turned any further.
Three months after first use, the SPIOLTO RESPIMAT should be discarded even if it has not been used.
Prepare for first use: 1. Remove clear base: Keep the cap closed.
Press the safety catch while firmly pulling off the clear base with the other hand.
2. Insert cartridge: Insert the narrow end of the cartridge into the inhaler.
Place the inhaler on a firm surface and push down firmly until it snaps into place.
3. Replace clear base: Put the clear base back into place until it clicks.
4. Turn: Keep the cap closed.
Turn the clear base in the direction of the arrows on the label until it clicks (half a turn).
5. Open: Open the cap until it snaps fully open.
6. Press: Point the inhaler toward the ground.
Press the dose-release button.
Close the cap.
Repeat steps 4-6 until a cloud is visible.
After a cloud is visible, repeat steps 4-6 three more times.
Daily use: TURN: Keep the cap closed.
TURN the clear base in the direction of the arrows on the label until it clicks (half a turn).
OPEN: OPEN the cap until it snaps fully open.
PRESS: Breathe out slowly and fully. Close the lips around the mouthpiece without covering the air vents.
While taking a slow, deep breath through the mouth, PRESS the dose-release button and continue to breathe in.
Hold breath for 10 seconds or for as long as comfortable. Repeat Turn, Open, Press for a total of 2 puffs.
Register or sign in to continue
Asia's one-stop resource for medical news, clinical reference and education
Already a member? Sign in
Register or sign in to continue
Asia's one-stop resource for medical news, clinical reference and education
Already a member? Sign in